| | |
|
| |
| | |
|
|
|
Sherwood Newcastle
|
R-772 Interconnect Package
|
|
Sherwood Newcastle R-772 Black & 3' Interconnect Package
|
R-772 Interconnect Package
|
|
7.1 Receiver with HDMI 1.3
|
List Price: $999.95
Your Price: $834.95
You Save: $165.00 (17 %)
Detailed Description
Sherwood Newcastle R-872 872 A/V Receiver AV
|
Package Includes: |
| 1 - Sherwood Newcastle
R-772 Black A/V Receiver |
| 1 - 12' M/M HDMI 1.3a A/V Cable |
| 2 - 3' M/M HDMI 1.3a A/V
Cables |
| 1 - 3' Ultra High End 4N Silver Coated
Copper Component Video Cables |
| 1 - 3' TosTos Optical
Audio Cables |
| 1 - 3' Ultra High End 4N
Silver Coated Copper Digital Audio Cables |
| 1 - 3' Ultra High End 4N
Silver Coated Copper Stereo Audio Cables |
| 1 - 12' Ultra High End 4N
Silver Coated Copper Subwoofer Audio Cables |
Both the R-872 and R-772 receivers are rated at
100 watts per channel for each of their 7 channels and both share a host of
common features including: HDMI 1.3 switching; lossless audio decoding; AM/FM
tuners with 30 presets; XM radio ready; automatic set-up with supplied
microphone; Newcastle’s SNAPTM Room EQ; input renaming; A/V Synch Delay;
digital/analog input polling; independent audio and video outputs for Zone 2;
RS-232 port for bi-directional control and more.
The included remote supports dual-mode, RF and
IR operation, is preprogrammed for most popular components, learns commands from
other units and both receivers have built-in RF to IR translators. The
translator converts RF input received from the remote and generates IR output to
control other system components. Complete system operation is possible—even if
the entire system is out of sight.
A second feature developed for custom
installation is these receivers' “Automatic Room 2” mode. With this mode, the
main room can be configured for 7.1 channel operation. When Zone 2 is activated,
the main room is automatically reconfigured for 5.1 and the rear center amps are
used to power Zone 2. When Zone 2 is turned off, the main room is reconfigured
back to 7.1.
An important feature for custom installation is
the lockable Installer Memory. Once the initial installation is complete, the
installer or the owner can lock all operating parameters into a special memory.
If the unit fails to operate as expected because a wrong button had been
selected on the remote, for example, power cycling the receiver will reload the
initial configuration and should restore normal operation.
Both units transcode all analog video to a
single component video output. Analog video and component video are separate and
HDMI and analog monitor cables will be necessary to support all video and OSD.
| - 100 Watts per Channel from 20
Hz-20 kHz in Stereo Mode, 8 ohms, with <0.05% THD |
| - 100 Watts per Channel x 7 in
Surround Mode |
- 2 in 1 out HDMI 1.3 switching |
| - Decodes DTS Master Audio HD
and Dolby Tru HD PCM via HDMI |
| - DTS-ES Discrete and Matrix |
- DTS-96/24 |
| - DTS NEO-6 Cinema and Music |
- Dolby Digital EX |
| - Adjustable Dolby Pro Logic IIx |
- Dolby Headphone Layers 1, 2, 3 |
| - Digitally Re-Masters PCM input to 96 kHz/
24-bit |
- Automatic Format Detection |
| - 192 kHz 24-bit DAC's for all channels |
- Dolby Virtual Speaker |
| - Pure Audio Mode |
- Crossover frequency 40 to 250 Hz |
| - A/V Synch delay by input |
- Firmware upgrade-able |
| - SNAP 12-band parametric EQ per channel
|
- RS-232 |
| - Universal Video™ upconverts
composite and S-Video to Component Video |
| - 2 Optical and 2 Co-ax Digital Inputs
|
- Digital Output |
| - On Screen Display (available from all
video outputs) |
- RF + IR Learning remote |
| - Program-mable Input Labeling |
- Crystal 32-Bit DSP processor |
| - 8 DSP Modes |
- 7.1 channel direct input |
| - Subwoofer Pre-Amp Output |
- Automatic 7.1 to 5.1 + Stereo |
| - Room 2 A/V Output w/
fixed/variable audio level, composite |
| - Lockable "Installer Memory" |
- Rear Panel Room-2 IR control with 1 input
and 1 output |
| - Dedicated Room 2 Remote |
- 12-Volt Trigger |
| - 2 HDTV-Ready Component Video Inputs |
- Component Video Output |
| - 4 Rear Panel Audio/Video Inputs |
- 4 Audio Inputs |
| - Front Panel A/V Input Including S-Video |
- Cinema EQ |
| - Tone Defeat |
- Automatic set-up for speaker level and
distance |
| - Channel Level Memory |
- 10-step Dynamic Range Control |
| - Totally Discrete Amplifier Stage (TDAS)
|
- Heavy Duty Speaker Binding Posts |
| - XM Connect and Play |
- XM Neural Surround |
| - 4 Gang FM tuner |
- Preset Scan |
| - 30 XM Presets |
- 30 AM/FM Station Presets |
| - Digi-Link III |
- Sleep Timer |
| - Aluminum Front Panel |
|
Additional InformationFind out more about the Sherwood Newcastle R-772
List Price: $2,659.89
Your Price: $2,499.95
You Save: $159.94 (6 %)
Atlantic Technology System 2400 Package
|
List Price: $1,909.85
Your Price: $1,594.90
You Save: $314.95 (16 %)
Atlantic Technology System 1400 Package
|
Product Reviews
|
New Page 1
|
|